Anywave MPTV, User Manual

Page: 21 / 96

MPTV V1 TX User Manual
MPTV-V1-1KW-USR-DOC-V1.0, 05/25/2018 Page 21 of 96
Rear Panel
The rear panel of Control Unit is shown below:

RF_OUT

Connector: N

Impedance: 50
Ω

Note: Sends pre-amplified RF signal to the inputs of PA modules

RF_IN_A/RF_IN_B

Connector: N

Impedance: 50
Ω

Note: To receive the RF_OUT signal from Exciter_A / Exciter_B

REFL_IN (TX Reflected Power)

Connector: BNC

Impedance: 50
Ω

Note: To receive feedback signal from Directional Coupler for Reflected
Power detection and monitoring.

FWD_IN (TX Forward Power)

Connector: BNC

Impedance: 50
Ω

Note: To receive feedback signal from Directional Coupler for Forward
Power detection and monitoring.

AUX_IN (TX Load Reject Power)

Connector: BNC

Impedance: 50
Ω

Note: To receive feedback signal from RJCT1 of reject Load for Absorbed
Power detection and monitoring

GPRS (reserved)

ERS485-A/ERS485-B: To be connected to REMOTE of Exciter_A/Exciter_B for
internal communication between exciters and Control Unit.

CAN-1A: To be connected to POWER&RS485 of PA#1 for internal
communication between PA module and Control Unit.

CAN-2A: To be connected to POWER&RS485 of PA#2 for internal
communication between PA module and Control Unit.

CAN-1B/CAN-2B: Reserved.