Anywave MPTV, User Manual

Page: 15 / 96

MPTV V1 TX User Manual
MPTV-V1-1KW-USR-DOC-V1.0, 05/25/2018 Page 15 of 96
1.4 RF System Connections
If you purchased an Anywave BPF, it is designed to be installed and mounted on
top of the TX cabinet (as shown below). Four metal stand-offs “feet” with mounting
hardware are supplied with the BPF to allow it to be fastened and secured to four
holes located in the top panel of the cabinet. Please reference Section 3
“Installation/Initial Turn-On” for step-by-step instructions on setting up and
connecting your RF System components.
(Please note: The MPTV comes standard with a
1 5/8 EIA Flanged output connector. If your
Antenna feed is other than 1 5/8 EIA flanged (as
shown on left), you will need to provide
whatever adapter hardware is necessary to
facilitate this connection to your Antenna feed).
Mount BPF
Connect Elbow,
Directional Couplers,
Attenuators and Exciter
feedback cables