（
3
）
When the display shows “F6.1”, press
to go to the F6.2 Menu and
display shows “F6.2”.
（
4
）
When display shows “F6.2”, press
and display shows the value of
Relay 1 setting. Edit Relay value according to editing procedures in Fig.
10.2. When completed
, press
to store the value and return to
F6.3 Menu. Display shows “F6.3”.
（
5
）
When display shows “F6.3”, press
and display shows the value of
Relay 2 setting. Edit Relay value according to Fig. 10.2. When
completed
, press
to store the value and return to F6.1 Menu.
Display shows “F6.1”.
（
6
）
Turn off the SW2 switch to exit from Calibration mode and enter into
Weighing Mode.
Fig. 12.1 Relay Output Menu
40
|
ANYLOAD 805TS & 805BS Series Weighing Indicator Operations Manual (v1703)
the Relay Output Menu. Display shows “F6.1”.
