19
General Usage Guideline
q
Keep the product away from water.
● The product is not waterproof. Do not use the product in places with high humidity
such as a bath or where rain may get it wet. If you carry the product close to your
body, moisture from sweat may corrode the internal parts causing a malfunction.
Note that malfunctions deemed to be caused by water are not covered by the
warranty, and may be impossible to repair. Since these malfunctions are not under
warranty, even when repair is possible, it will be done at the user's expense.
q
Clean the product with a dry and soft cloth (Lens cleaning Cloth).
● If the product is wiped with alcohol, paint thinner, benzene or detergent, the
printing may disappear or color may fade.
q
Do not place the product near air conditioner outlets.
● Condensation may form due to rapid changes in temperature, and this may
corrode internal parts and cause malfunction.
q
Do not place the product where excessive force will be applied to it.
● If the product is inserted to a full bag, or placed in a pocket and sat on, its
internal PCBs may be damaged or malfunction. Such damage is not covered
by warranty.
q
Keep the connector contacts clean with a dry and soft cloth.
● Dirty contacts can result in intermittent connections.
q
Dropping down the device can cause a critical damage on LCD part.
●
AnyDATA
will not be liable for trouble which arose from user’s carelessness.
q
Be sure to keep a separate note of the information registered to
the product and the RUIM card.
●
AnyDATA
will not be liable for a loss of the data that you recorded.
