33
8. Resume from outage
ANY
CUBIC i3 MEGA
allows resuming print job after accident power loss.
This function only valid when print offline (by SD card only).
1. As shown in
Fig. 37
, in slicing software (i.e. Cura), it is required to place the model at the
rear of platform. Because in case of “Resume from outage”, machine will home first
and could touch/interfere with the unfinished object if the model was placed in the front
area (
Fig. 38
).
(Figure 37)
(Figure 38)
Rear position
Zero (Home position)
Front
Rear
