26
(2) Basic and Advanced options
Suggested parameters of “Basic” and “Advanced” for printing PLA are shown in
Fig.
28
. Stay the mouse upon each box and there will be explanation for it.
(Figure 28)
(3) Plugins
*
It is recommended for new user to leave the plugins as default (no plugin enabled).
Plugins are custom settings which will active at specific point during printing. There are
two pre-loaded plugins with Cura: Pause at height and Tweak At Z. More plugins can be
found via:
http://wiki.ultimaker.com/Category:CuraPlugin
As shown in
Fig. 29
, to enable one of the plugins, such as Pause at height, first click it
and then click the drop-down arrow to enter the setting interface.
