3
Motor:
Disable all motors (only valid when no print job)
Status:
Enter the sub-menu with Print/Pause/Resume icon (only valid for offline print)
(Other information: ①Files ②Print Rate ③Time ④Progress ⑤E0 Temp ⑥Bed Temp ⑦
coordinates for X/Y/Z axis ⑧Return to previous menu)
Speed:
Enter the menu to adjust ①Fan speed (0-100) ②Print Rate (50-999)
Return:
Return to Home Menu
Tools
Home:
①Home X ②Home Y ③Home Z ④Home All ⑤Return (only valid when no print job)
Axis:
① Home all axis ②Move X/Y/Z axis by 0.1/1/10 ③Choose the travel speed
Low/Medium/High (only valid when no print job)
Preheat:
①Preheat PLA ②Preheat ABS (only valid when no print job)
(Other information: ①E0 Temp ②Bed Temp)
Cooling:
Cut off the power of hotend and heated bed (only valid when no print job)
Filament:
①Filament In ②Filament Remove ③ Stop (will automatically heating to 200°C for
filament in or remove) (only valid when on print job)
Reset:
Popup window to decide if reboot the mainboard
More:
Enter the next page of Tools sub-menu
TP:
Touch panel alignment（click on the cue points）
Help:
Basic description of the Menu
Info:
Information about the product
Return:
Return to Home Menu
