manualshive.com logo in svg

Anybus CompactCom 40 EtherNet/IP, Network Manual

Share
Download
Anybus CompactCom 40 EtherNet/IP Network Manual Download Page 9

About This Document   

9

Doc.Id. HMSI-27-212

Anybus CompactCom 40 EtherNet/IP
Doc.Rev. 1.5

P.3 Conventions & Terminology

The following conventions are used throughout this manual:

• Numbered lists provide sequential steps
• Bulleted lists provide information, not procedural steps
• The terms ‘Anybus’ or ‘module’ refers to the Anybus CompactCom 40 module.
• The terms ‘host’ or ‘host application’ refers to the device that hosts the Anybus module.
• Hexadecimal values are either written in the format NNNNh or the format 0xNNNN, where 

NNNN is the hexadecimal value.

P.4 Abbreviations

P.5 Support

For general contact information and where to find support, please refer to the contact and sup-
port pages at www.anybus.com.

Abbreviation

Meaning

API

assigned packet interval

RPI

requested packet interval

T

target (in this case the module)

O

origin (in this case the master)

Summary of Contents for CompactCom 40 EtherNet/IP







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands