manualshive.com logo in svg

Anybus CompactCom 40 EtherNet/IP, Network Manual

Share
Download
Anybus CompactCom 40 EtherNet/IP Network Manual Download Page 14

Basic Operation   

14

Doc.Id. HMSI-27-212

Anybus CompactCom 40 EtherNet/IP
Doc.Rev. 1.5

2.2.3 EtherNet/IP & CIP Implementation

By default, the module supports the generic CIP profile. Optionally, it is possible to re-route requests to 
unimplemented CIP objects to the host application, thus enabling support for other profiles etc.

To support a specific profile, perform the following steps:

• Set up the identity settings in the EtherNet/IP Host Object according to profile requirements.
• Implement the Assembly Mapping Object in the host application.
• Set up the Assembly Instance Numbers according to profile requirements.
• Enable routing of CIP messages to the host application in the EtherNet/IP Host Object.
• Implement the required CIP objects in the host application.

See also...

•  “EtherNet/IP Host Object (F8h)” on page 161 (Host Application Object)
•  “Command Details: Process_CIP_Object_Request” on page 166

2.2.4 Web Interface

The web interface can be fully customized to suit a particular application. Dynamic content can be cre-
ated by means of JSON and SSI scripting. Data and web pages are stored in a FLASH-based file system, 
which can be accessed using any standard FTP-client.

See also...

•  “File System” on page 20
•  “FTP Server” on page 22
•  “Web Server” on page 24
•  “Server Side Include (SSI)” on page 33
•  “JSON” on page 51

2.2.5 Socket Interface (Advanced Users Only)

The built in socket interface allows additional protocols to be implemented on top of TCP/IP.

See also...

•  “Socket Interface Object (07h)” on page 109 (Anybus Module Object)
•  “Message Segmentation” on page 189

Summary of Contents for CompactCom 40 EtherNet/IP







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands