manualshive.com logo in svg

Anybus CompactCom 40 EtherNet/IP, Network Manual

Share
Download
Anybus CompactCom 40 EtherNet/IP Network Manual Download Page 56

JSON   

56

Doc.Id. HMSI-27-212

Anybus CompactCom 40 EtherNet/IP
Doc.Rev. 1.5

ipstatus.json & ipconf.json

These two object share the same data format. The object ipconf.json returns the configured IP settings, 
and ipstatus.json returns the actual values that are currently used. ipconf.json can also be used to alter 
the IP settings.

GET network/ipstatus.json, or GET network/ipconf.json.

{

   "dhcp":       0,

   "addr":       "192.168.0.55",

   "subnet":     "255.255.255.0",

   "gateway":    "192.168.0.1",

   "dns1":       "10.10.55.1",

   "dns2":       "10.10.55.2"

   "hostname":   "<hostname>",

   "domainname": "hms.se"

}

To change IP settings, use network/ipconf.json. It accepts any number of arguments from the list 
above. Values should be in the same format. 

Example:

GET ipconf.json?dhcp=0&addr=10.11.32.2&hostname=abcc123&domainname=hms.se

ethconf.json

GET network/ethconf.json.

“comm2” is not present if Ethernet port 2 is inactivated.

The values of "comm1" and "comm2" comes from the Network Configuration object (04h) instance 7 
and instance 8. See “Instance Attributes (Instance #7, Ethernet Communication Settings 1)” on page 
101 for more information.

Name

Data Type

Note

dhcp

Number

-

addr

String

-

subnet

String

-

gateway

String

-

dns1

String

-

dns2

String

-

hostname

String

-

domainname

String

-

Name

Data Type

Note

comm1

Number

-

comm2

Number

-

Summary of Contents for CompactCom 40 EtherNet/IP







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands