manualshive.com logo in svg

Anybus CompactCom 40 EtherNet/IP, Network Manual

Share
Download
Anybus CompactCom 40 EtherNet/IP Network Manual Download Page 164

   

164

Doc.Id. HMSI-27-212

Anybus CompactCom 40 EtherNet/IP
Doc.Rev. 1.5

26 Enable EtherNet/

IP QuickConnect

a

Get

BOOL

False

Value:Meaning:

True EtherNet/IP QuickConnect function-

ality enabled.

False EtherNet/IP QuickConnect function-

ality disabled.

29 Ignore Sequence 

Count Check

Get

BOOL

False

Setting this attribute to “true” makes the 
module ignore the Sequence Count Check 
for consumed Class 1 data.
This means that all data, not just changed/
new data, received from the Originator, will 
be copied to the application. 
Copying all data and not just changed data 
is a violation of the CIP specification. It will 
also affect the performance of the module. 

Use precaution when setting this flag to 
“true”. 

HMS will do NO performance measure-
ments and states NO guarantees about how 
performance will be affected when copying 
all data. 

30 ABCC ADI Object 

Number

Get

UINT16

00A2h

This attribute either changes the object num-
ber of the ADI Object or disables the ADI 
Object (see page 83). Valid object numbers 
are within the vendor specific ranges (0064h 
- 00C7h and 0300h - 04FFh). Any other 
value will disable the ADI object.

31 Enable DLR

Get

BOOL

True

True = DLR functionality enabled
False= DLR functionality disabled

a. If the module is configured to use EIP QuickConnect functionality, the EDS file has to be changed. As the EDS file 

is changed, the identity of the module has to be changed and the module will require certification, see  “Conform-
ance Test Guide” on page 12.

# Name

Access Type

Default Value

Comment

Summary of Contents for CompactCom 40 EtherNet/IP







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands