manualshive.com logo in svg

Anybus CompactCom 40 EtherNet/IP, Network Manual

Share
Download
Anybus CompactCom 40 EtherNet/IP Network Manual Download Page 155

Doc.Id. HMSI-27-212

Anybus CompactCom 40 EtherNet/IP
Doc.Rev. 1.5

Chapter 10

10. Host Application Objects

10.1 General Information

This chapter specifies the host application object implementation in the module. The objects listed here 
may optionally be implemented within the host application firmware to expand the EtherNet/IP imple-
mentation.

Standard Objects:

• Application Object (FFh) - (see Anybus CompactCom 40 Software Design Guide)
• Application Data Object (FEh) - (see Anybus CompactCom 40 Software Design Guide)
• Energy Control Object (F0h) - (see Anybus CompactCom 40 Software Design Guide)
• Assembly Mapping Object (EBh) - (see Anybus CompactCom 40 Software Design Guide)
• Modular Device Object (ECh) - (see Anybus CompactCom 40 Software Design Guide)
•  “Sync Object (EEh)” on page 160

Network Specific Objects:

•  “CIP Identity Host Object (EDh)” on page 158
•  “EtherNet/IP Host Object (F8h)” on page 161
•  “Ethernet Host Object (F9h)” on page 171
•  “Application File System Interface Object (EAh)” on page 174
•  “Functional Safety Host Object (E8h)” on page 156

Summary of Contents for CompactCom 40 EtherNet/IP







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands