Anybus CompactCom 40 EtherNet/IP Network Manual Download Page 46

Page: 46 / 198

Server Side Include (SSI)

Doc.Id. HMSI-27-212

Anybus CompactCom 40 EtherNet/IP
Doc.Rev. 1.5

6.4 Argument Functions

6.4.1 General Information

Argument functions are supplied as parameters to certain command functions.

General Syntax:

(Syntax depends on context)

Argument Functions:

6.4.2 ABCCMessage()

This function issues an object request towards an object in the module or in the host application.

Syntax:

ABCCMessage(object, instance, command, ce0, ce1,

msgdata, c_type, r_type)

object

- Specifies the Destination Object

instance

- Specifies the Destination Instance

command

- Specifies the Command Number

ce0

- Specifies CmdExt[0] for the command message

ce1

- Specifies CmdExt[1] for the command message

msgdata

- Specifies the actual contents of the MsgData[] subfield in the command

c_type

- Specifies the data type in the command (msgdata)

r_type

- Specifies the data type in the response (msgdata)

Numeric input can be supplied in the following formats:

Decimal (e.g. 50)-(no prefix)
Octal (e.g. 043)- Prefix 0 (zero)
Hex (e.g. 0x1f)- Prefix 0x

Summary of Contents for CompactCom 40 EtherNet/IP







































































































































































































Search results

Summary of Contents for CompactCom 40 EtherNet/IP

Reviews:

Brands by name

Popular brands

Anybus CompactCom 40 EtherNet/IP, Network Manual

Search results

Summary of Contents for CompactCom 40 EtherNet/IP

Reviews:

Brands by name

Popular brands