manualshive.com logo in svg

ANTlabs InnGate 3 E-series, Administrator'S Manual, Page: 96 / 164

Share
Download
ANTlabs InnGate 3 E-series Administrator'S Manual Download Page 96

Connectivity 

Made Easy

  

Page 96 of 164

 

7.2.3

 

Session Monitor 

View real-time information about users currently logged in. Users who have 
logged out will be found in the Session Logs. 

 

 

To view the Session Monitor: 
 

1.

 

Click on Monitors. 

 

2.

 

Click on Session. 

 
Any active sessions will be listed as shown in Figure 7-7. 
 
The following column in the Session Monitor is further explained here: 

 

1.

 

Status – Session status: 

 

a.

 

active – The user has not logged out and the session is still 
active. 

 

b.

 

unexpired – The user is physically disconnected from the 
network but the Usage Duration for the User has not been 
exceeded. 

 

c.

 

pending_close – The user has logged out and the InnGate has 
initiated a Stop request to the RADIUS server and is awaiting a 
response from the RADIUS server. 

 
 
Click “CSV: 

” to export the entries into a comma-separated-values 

file. 
 
Click 

 to logout any selected user sessions. 

 

 

Summary of Contents for InnGate 3 E-series





































































































































































Reviews:

No comments