ANTlabs InnGate 3 E-series Administrator'S Manual Download Page 94

Page: 94 / 164

Connectivity

Made Easy

Page 94 of 164

Memory – It is common for the memory used to be above 90%
as the system maximizes the use of memory to cache commonly

used data to improve system performance.

Firmware information – Shows the product, version, license
information and serial numbers.

Figure 7-4 Firmware Information

Click button

to refresh the InnGate’s status summary.

7.2.2

Device Monitor

View real-time information about the devices detected on the downstream.
Devices that have disconnected will be found in the Device Logs.

To view the Device Monitors:

Click on Monitors.

Click on Device.

Figure 7-5 shows the device monitor’s interface when there are devices
connected on the downstream.

Figure 7-5 List of device detected

Summary of Contents for InnGate 3 E-series





































































































































































Search results

Summary of Contents for InnGate 3 E-series

Reviews:

ANTlabs InnGate 3 E-series, Administrator'S Manual, Page: 94 / 164

Search results

Summary of Contents for InnGate 3 E-series

Reviews: