manualshive.com logo in svg

ANTlabs InnGate 3 E-series, Administrator'S Manual, Page: 21 / 164

Share
Download
ANTlabs InnGate 3 E-series Administrator'S Manual Download Page 21

Connectivity 

Made Easy

  

Page 21 of 164

 

 

You need to purchase the Stored Volume Prepaid module in order for 
this option to be enabled. 

 

d.

 

Stored Volume – multiple usage periods valid as long as there 
is balanced volume left. 

 

i.

 

Change users to Throttled plan after volume is 
exceeded –  

 

If this option is unchecked, then the user is immediately 

logged out from the system when the volume limit is 
exceeded. 
 
If this option is checked, then the user’s bandwidth will 
be changed to that specified in the ‘Throttled’ plan once 
the volume limit is exceeded.  The user can continue to 
use the system until he logouts or departs from the 

network, after which the account cannot be used for 
login anymore. 

 

 

There is a default Throttled Plan that is pre-configured in the 
Gateway.  The user’s bandwidth will be automatically adjusted to the 
values specified in this plan if the user’s plan is a volume plan with the 
throttled option enabled and the volume limit is exceeded.  The default 
bandwidth for this plan is unlimited.  You will need to change it to your 
desired throttled value if you want to use this feature. 

 
4.

 

Upload / Download Bandwidth – Set the bandwidth limits here. 

 

5.

 

Routable IP Address – Select if you want to allow users to request 
for a public IP address. Useful if the user has some applications that 
need it or cannot work in a NAT environment. 

 

6.

 

Attempt to reconnect users… – Select this if you want to enable 
cookie-based relogin so that users need not keep going through the 

welcome login page for separate sessions of usage. 

 
 

Summary of Contents for InnGate 3 E-series





































































































































































Reviews:

No comments