ANTlabs InnGate 3 E-series Administrator'S Manual Download Page 130

Page: 130 / 164

Connectivity

Made Easy

Page 130 of 164

To configure the admin access:

Click on Admin Accounts.

Click on Admin Access.

Figure 8-25 shows the interface for configuring the admin access settings:

Deny users from accessing this Admin system via LAN – If
enabled, access to the Admin GUI from the downstream is prohibited.

Limit users accessing this admin system to these IP Addresses

/ Subnet Mask pairs – If enabled, only client machines whose IP
addresses are listed here will be allowed to access the Admin GUI
(from the upstream).

Click and to add and remove the IP address and subnet mask
entries defined.

Figure 8-25 Admin Access Settings

Click

to confirm the changes.

8.13.2

Change the Default Admin User Account

Summary of Contents for InnGate 3 E-series





































































































































































Search results

Summary of Contents for InnGate 3 E-series

Reviews:

ANTlabs InnGate 3 E-series, Administrator'S Manual, Page: 130 / 164

Search results

Summary of Contents for InnGate 3 E-series

Reviews: