ANTlabs InnGate 3 E-series, Administrator'S Manual, Page: 78 / 164

Connectivity Made Easy
Page 78 of 164
Chapter 4
WAN NETWORK SETTINGS
4.1 Overview
You can configure the following under the WAN Settings:
1. WAN Setup – See Section 4.2.
2. DNS Setup – This was previously covered in
Chapter 1: GETTING
STARTED
under
Section 1.3.3: Configuring the Domain Name Server
.
4.2 WAN Setup
Like any other device connecting to a network, the InnGate’s network settings
such as its IP address on the upstream must be configured. The WAN setup
interface allows you to do this:
1. Configuring the WAN interface was previously covered in
Chapter 1:
GETTING STARTED
under
Section 1.3.2: Configuring the WAN
Interface
.
4.2.1 Defining a Static Route
To setup a Static Route for a Service Provider:
1. Click on Static Routes.
Any existing entries will be displayed (see Figure 4-1). Click on an entry to
modify it or click
to create one.
Figure 4-1 List of Static Routes