Connectivity
Made Easy
Page 76 of 164
Figure 3-32 Device Detection Settings
The fields are described as follows:
1.
Probe each user’s presence… – Interval between probes.
2.
Disconnect user after… – Specify the number of unacknowledged
probes before the user is disconnected.
3.
Probe a maximum of… – Select a value between 0 – 45 depending
on the network requirements.
Click
to confirm the changes.
3.7
ARP Setup
You can configure how the InnGate will manage ARP requests and responses.
To configure the ARP settings:
1.
Click on LAN.
2.
Click on ARP.
Figure 3-33 shows the ARP Settings configuration page.
Figure 3-33 ARP Settings