Anthos SMART TOUCH R7, Operating Instruction

Page: 33 / 90

33 33 EN
R7
- OPERATING INSTRUCTION
5.2. Foot control
3 types of foot controls are available:
1
"Multifunction” foot control
"Push-pedal” foot control
"Power Pedal" foot control.
NOTE:
the "multifunction" and "pressure" foot controls can also be
supplied in wireless version.
5.2.1. "Multifunction” foot control
Description of the parts
1 Handle
2 Control pedal
3 Dental chair movements
4 Chip-air/patient rinsing position control.
5 Water Clean System/Automatic dental chair return control.
6 LED (not active).
7 Battery charge LED (wireless version only).
Joystick for dental chair movement (3).
With instrument removed
• Starts the instrument.
• Adjusts the rpm of rotary instruments.
• To right: operation with spray (if foreseen for selected instrument).
NOTE : At the end of work, air is automatically blown to eliminate
any drops of liquid remaining in the spray ducts.
• To left: spray-free operation
With instruments in place
• Fully right: dental chair automatic return (RA).
• Fully left: patient rinse position reached (PR).
NOTE : If the pedal is pushed fully left again, the dental chair moves
back to the work position.
WARNING!
These dental chair functions are activated by keeping the pedal at the
end of the travel for at least 2 seconds .
Controller joystick for dental chair movement ( 3 )
These buttons move the dental chair as follows:
Dental chair seat up.
Dental chair backrest up.
Dental chair seat down.
Dental chair backrest down.
To stop the chair movement, release the joystick.
NOTE : all the buttons used to move the dental chair are inoperative
when an instrument is removed and the foot control pedal is actuated.
NOTE
: the joystick operating mode can be changed with the instru-
ment removed (see Paragraph 5.1.1.2.3.).