Anthos SMART TOUCH R7, Operating Instruction

Page: 49 / 90

49 49 EN
R7
- OPERATING INSTRUCTION
Scaler power change mode selection.
With the instrument in working position, select scaler power change mode
by touching the following icon buttons:
Linear change proportional to the movement of the foot control lever
ON/OFF change that results in delivery of the maximum power
set upon activation of the foot control lever
The active mode icon is shown on the TOUCH DISPLAY.
NOTE: the data is automatically stored.
Cooling water enable.
With the instrument in working position, select whether or not water should
be delivered by the instrument by touching the following icon buttons:
Operation with water
Operation without water
The change is cyclic each time the button is touched and the active mode icon
is shown on the TOUCH DISPLAY.
NOTE: during operation without water, the maximum power delivered
is 50% of the maximum power settable.
NOTE: the data is automatically stored.
Scaler operating mode selection.
With the instrument in working position, select scaler operating mode by
touching the following icon buttons:
Normal operating mode
ENDO operating mode
The change is cyclic each time the button is touched and the active mode icon
is shown on the TOUCH DISPLAY.
NOTE: when the foot control is activated, the operating mode
cannot be changed .
NOTE: the data is automatically stored.