Anthos A5 CONTINENTAL, Operator'S Manual

Page: 44 / 100

A5 - A6 PLUS - L6
44
EN
Torque value adjustment.
• Set the maximum torque value using buttons (
B ).
The torque value is expressed in % or Ncm for certified reducers.
The appearance of the symbol (
Z ) highlights a value reading tolerance of
±20%.
The data set are automatically saved.
Drill rotation at maximum torque.
Select the drill rotation mode when the set maximum torque is reached:
S1
Rotation lock.
S2
Stop normal rotation and reverse rotation.
S3
Stop normal rotation, short reverse rotation and resumption of
normal rotation.
Certified contra angle pre-set list.
Display text Ratio Display torque Torque tolerance to drill Reference contra angles
128:1 128:1 100% ±20% All makes
120:1 120:1 100% ±20% All makes
64:1 64:1 100% ±20% All makes
40:1 40:1 100% ±20% All makes
18:1 18:1 100% ±20% All makes
16:1 16:1 5 Ncm ±20% All makes
E16 16:1 5 Ncm ±10% Stern Weber E16
®
EVO E16 16:1 5 Ncm ±10% Goldspeed EVO E16
®
10:1 10:1 5 Ncm ±20% All makes
ER10 10:1 5 Ncm ±10% NSK ER10
®
9.5:1 9.5:1 5 Ncm ±20% All makes
S6:1 6:1 5 Ncm ±10% Sirona Endo 6:1
K5.4:1 5.4:1 5 Ncm ±10% Kavo IntraC 0767 LHC
®
EVO E4 4:1 5 Ncm ±10% Goldspeed EVO E4®
4:1 4:1 5 Ncm ±20% All makes
ER4 4:1 5 Ncm ±10% NSK ER4
®
K2.7:1 2.7:1 5 Ncm ±10%
Kavo LUX 7LP
®
Kavo IntraC 0768 LHC
®
WD-79M 2:1 5 Ncm ±10%
W&H WD-79M
®
W&H EB-79M
®
1:1 1:1 4.5Ncm ±10% All makes
Menu with micromotor extracted and active.
The following functions can be changed:
• adjust the maximum rotation speed of the drill using the buttons “
+
” or “
-
”;