Anthos A5 CONTINENTAL, Operator'S Manual

Page: 35 / 100

A5 - A6 PLUS - L6
EN
35
5.2.3. "POWER PEDAL" FOOT CONTROL
Description of the parts.
1
Handle.
2
Foot control.
3
Dental chair movement control.
4
Chip-air control or activation/deactivation of instrument spray function.
5
Water Clean System control or activation/deactivation of instrument
spray function.
6
Automatic dental chair return or programme "B” recall activation.
7
Patient rinse position or programme "A" recall activation.
8
Spray operation LED.
Foot control (2).
With instrument removed
• Pushing the pedal (
2 ) for a long time starts the instrument.
You can adjust the speed/power by modulating the pressure on the
pedal.
The foot control adjusts the speed/power of the instrument
from the minimum to maximum value set from the dentist's
board.
• Release the pedal (
2 ) to stop instrument operation.
With the spray active, at the end of the operation a blast of air
is automatically activated to remove any residual drops of
liquid in the spray ducts.
With instruments at rest
• When the foot control (
2 ) is pressed, all automatic dental chair
movements are automatically blocked.
Joystick for dental chair movements (3).
It controls the following movements:
9
Dental chair seat up.
10
Dental chair backrest up.
11
Dental chair seat down.
12
Dental chair backrest down.
To stop movement, release the control.
•
All dental chair movements are blocked when an instrument is
being used or the BIOSTER S system is running.
•
It is possible to edit the joystick operation once the instrument
is extracted (see paragraph 5.1.1.7.).
Left-hand button (4).
With instrument removed
• Short press: enables/disables the spray function.
• Long press (at least 2 seconds): sends a jet of air to the instruments
(Chip air); the jet stops when the button is released.
The control works only when the Turbine and Micromotor are
in working position.
•
A short sound warns of the switching.
When the LEDs (8) are on, they indicate operation WITH
spray
.