Anthos A5 CONTINENTAL, Operator'S Manual

Page: 40 / 100

A5 - A6 PLUS - L6
40
EN
5.4. TURBINE
Connecting the handpiece and changing the drill.
Refer to the specific instructions provided with the handpiece.
Use.
The instrument is supplied NON-sterile.
Carefully read the operating instructions supplied with the
instrument before attempting to sterilize.
Operating times: work 5 min., rest 5 min.
f
Cock that adjusts the amount of spray water
e
Cock that adjusts the amount of air spray for all the instruments.
g
Turbine return air filter.
• Place the instrument in its work position.
Instrument activation is highlighted by the relevant managing
screen appearing on the DISPLAY.
• Use the foot control lever to start the instrument (see paragraph 5.2.).
The turbine hose can also be used to connect the air micromotors equipped with 4-way connectors and conforming with standard ISO 13294
and/or other air-operated instruments with the same 4-way connector.
Adjusting the drill’s rotation speed:
• Set the percentage of drill’s maximum rotation speed using buttons (
A )
The data set are automatically saved.
Turning on the fiber optics.
• Place the instrument in its work position.
• Press the button to turn Fiber Optics on/off (
F ).
The Fiber Optics switch off when the turbine is not used for 30
seconds (rheostat lever disabled).