manualshive.com logo in svg

Ansul R-102, Installation And Maintenance Manual

The Radarcan R-102 is a cutting-edge electronic device designed to repel mosquitoes and other insects from your home or outdoor spaces. Enhance your comfort and well-being with this effective insect repellent. Easily access the detailed User Manual for free download from our website, ensuring optimal usage of this remarkable product.

Share
Download
background image

SECTION 9 – APPENDIX

UL EX3470    ULC EX3470

2014-SEP-01    REV. 11    PAGE 9-5

R-102 Restaurant Fire Suppression Manual

SYSTEM COMPONENT INDEX
Part No.  Description
429853  Mechanical AUTOMAN Regulated Release 

 

Shipping Assembly

 

  Includes:  Regulated Release Mechanism in

 

   

Stainless Steel Mounting Enclosure

429856   Electric AUTOMAN Regulated Release  

Shipping Assembly (120VAC)

 

  Includes:  Regulated Release Mechanism with

 

   

Solenoid and Switch in

 

   

Stainless Steel Mounting Enclosure

429850  Regulated Actuator Shipping Assembly

 

  Includes:  Actuator and Regulator in

 

   

Stainless Steel Mounting Enclosure

429870  Stainless Steel Mounting Box Shipping Assembly

 

  Includes:  Stainless Steel Mounting Box

 

  

429872  Two Tank Enclosure Shipping Assembly

 

  Includes:  Two Expellant Gas Hoses

  

 Two 

Grommets

 

   

Stainless Steel Mounting Box

429859  24VDC Regulated Release Shipping Assembly

 

  Includes:   24VDC AUTOMAN II-C Release 

Mechanism in Stainless Steel 

Mounting Box

430299   3 Gallon Mechanical Release Shipping Assembly 

including:

 

429853   Mechanical Regulated Release Assembly

 

429862   3 Gallon Tank Assembly

430300   1.5 Gallon Mechanical Release Shipping Assembly 

including:

 

429853   Mechanical Regulated Release Assembly

 

429864   1.5 Gallon Tank Assembly

430309   3 Gallon Regulated Actuator Shipping Assembly 

including:

 

  429850   Regulated Actuator Assembly

 

  429862   3 Gallon Tank Assembly

430316   1.5 Gallon Stainless Steel Enclosure Shipping 

Assembly including:

 

  429870   Single Tank Mounting Box Assembly

 

  429864   1.5 Gallon Tank Assembly

430317   3 Gallon Stainless Steel Enclosure Shipping 

Assembly including:

 

  429870   Single Tank Mounting Box Assembly

 

  429862   3 Gallon Tank Assembly

430324   6 Gallon Stainless Steel Enclosure Shipping 

Assembly including:

 

  429872   Two Tank Mounting Box Assembly

 

  429862   3 Gallon Tank Assembly (2)

430332   3 Gallon Mounting Bracket Shipping Assembly  

including:

 

  429878   3 Gallon Mounting Bracket Assembly

 

  429862   3 Gallon Tank Assembly

Part No.  Description
418054   OEM Regulated Electric Release Shipping 

Assembly (120VAC)

 

  Includes:   Regulated Release Mechanism with 

Solenoid and Switch

 

   

1/4 in. Hose and Mounting Bracket

79493 

 OEM Regulated Mechanical Release Shipping 

Assembly

 

  Includes:  Regulated Release Mechanism

 

   

1/4 in. Hose and Mounting Bracket

418691  OEM Regulated Actuator Shipping Assembly

 

  Includes:   Actuator and Regulator

  

 Hose

  

 Bracket

429878  3 Gallon Bracket Assembly

 

(Bracket Only)

433485  Remote Release Assembly
439946  OEM Remote Release Assembly
418522  OEM Regulated Actuator Shipping Assembly

 

  Includes:   Actuator and Regulator

  

 Hose

429862  3 Gallon Tank Shipping Assembly
429864  1.5 Gallon Tank Shipping Assembly
56972 

Regulator Test Kit

 

  Includes:  Gauge, Hose and Valve Assembly

79694 

 1.5 Gallon (5.8 L) Container of ANSULEX Low pH 

Liquid Fire Suppressant

79372 

 3.0 Gallon (11.6 L) Container of ANSULEX Low 

pHLiquid Fire Suppressant

423429  Cartridge Shipping Assembly (LT-20-R) (TC/DOT)
423435  Cartridge Shipping Assembly (LT-30-R) (TC/DOT)
423493   Cartridge Shipping Assembly (R-102 Double-Tank) 

(TC/DOT)

423491   Cartridge Shipping Assembly (LT-A-101-30)  

(TC/DOT)

423439  Cartridge Shipping Assembly (101-10) (TC/DOT)
15850 

Cartridge Shipping Assembly (101-10) (DOT)

423441  Cartridge Shipping Assembly (101-20) (TC/DOT)
423443  Cartridge Shipping Assembly (101-30) (TC/DOT)
428440  Cartridge Shipping Assembly (LT-20-R) (European)
428441  Cartridge Shipping Assembly (LT-30-R) (European)
428446   Cartridge Shipping Assembly (R-102 Double Tank) 

(European)

428442   Cartridge Shipping Assembly (LT-A-101-30) 

(European)

Summary of Contents for R-102





























































































































































































Reviews:

No comments

Related manuals for R-102

GE Druck DPI 620 Genii Quick Start Manual preview
Druck DPI 620 Genii
Brand: GE Pages: 154
Datex-Ohmeda Aestiva/5 Operation Manual preview
Aestiva/5
Brand: Datex-Ohmeda Pages: 104
Baker Hughes Druck DPI 620 Genii Instruction Manual preview
Druck DPI 620 Genii
Brand: Baker Hughes Pages: 166
Baker Hughes Druck DPI 620 Genii Safety And Quick Start Manual preview
Druck DPI 620 Genii
Brand: Baker Hughes Pages: 340
Bard PowerGlide Patient Manual preview
PowerGlide
Brand: Bard Pages: 36
Bard Excalibur Instructions For Use preview
Excalibur
Brand: Bard Pages: 2
Bard Peripheral Vascular True Instructions For Use Manual preview
True
Brand: Bard Peripheral Vascular Pages: 44
Tabi Aura Installation Instructions Manual preview
Aura
Brand: Tabi Pages: 8
Dabi Atlante EAGLE 3D Owner'S Manual preview
EAGLE 3D
Brand: Dabi Atlante Pages: 102
Farmi Forest Corporation VALBY HF 231 Operation, Maintenance And Spare Parts preview
VALBY HF 231
Brand: Farmi Forest Corporation Pages: 32
Gait up GAIT UP GO Quick Start Manual preview
GAIT UP GO
Brand: Gait up Pages: 12
Gait up Physilog 6S Quick Start Manual preview
Physilog 6S
Brand: Gait up Pages: 6
Gaiam Stability Ball Setup, Workout Tips And Care & Safety Manual preview
Stability Ball
Brand: Gaiam Pages: 2
Garmin GNX Wind Owner'S Manual preview
GNX Wind
Brand: Garmin Pages: 10
Naviom AIS Installation Instructions Manual preview
AIS
Brand: Naviom Pages: 31
JB-Lighting Varycolor MICRO 150HTI User Manual preview
Varycolor MICRO 150HTI
Brand: JB-Lighting Pages: 18
QMAXZ Lighting QS Series User Manual preview
QS Series
Brand: QMAXZ Lighting Pages: 36
Tar River SLC Series Operator'S Manual preview
SLC Series
Brand: Tar River Pages: 26

Brands by name

Popular brands

Load more brands