67
5.5.4.5.2 Changing the content of settings 1(PRESET1)
(1) When PRESET1 is selected from CUSTOM items and the "ENT" key is pressed, the PRESET1 screen
(See chart below) appears.
(2) Select items with up-down keys and contents with left-right keys.
The selected items will be enclosed by square frames and the contents will appear in reversed display. (a)
Repeat this operation when multiple settings are to be made.
(3) After the setting is completed, exit from the PRESET1 screen with the "ENT" key.
Note) The contents will be displayed in (b) together with the numbers selected in P TABLE.
Heading Flash
Each revolution of the antenna turns the heading marker on
and off.
b) Stern Mark
Display/non-display of the stern line
c) North Mark
Display/non-display of the stern line
ST'BY screen
Setting the screen display in stand-by
NAVI: Navigation Data screen
NOR: Normal screen
e) Buzzer Volume
Setting the volume of the buzzer
VRM Unit
Setting VRM unit
NM: Nautical mile
KM: Kilometer
SM: Statute mile
g) Water temperature
Setting water temperature unit
C: Celsius
F: Fahrenheit
h) Depth Unit
Setting Depth unit
M: Meter
FT: Feet
FM: Fathom
i) EBL Mode
Setting Mode of EBL
REL: Relative bearing from HM
TRUE: True bearing
MAG: Magnetic bearing
j) WayPoint Mode
Setting WayPoint bearing mode
TRUE: True bearing
MAG: Magnetic bearing
k) Heading Source
Setting Heading source;
NMEA
SIN/COS: Compass Data with SIN/COS signal
12BIT: Compass Data with 12bits serial signal
10BIT: Compass Data with 10bits serial signal
l) Heading Type
Heading Information Type setting
MAG: Magnetic bearing
TRUE: True bearing
m) Cross cursor position display Mode
DIST/BRG: Range and Bearing indication
LAT/LON: Latitude and Longitude indication
n) Transmitting pulse width
Pulse setting for Rang (Note: )
