30
eq \x(STC)
eq \x(Control knob) ------
eq \x(STC)
The
adjustment
state is ended.
eq \x(Other function key)
Shift to other functions
eq \x(AUTO)
eq \x(AUTO)--------- STC, GAIN, and FTC are set at AUTO
and the adjustment state is ended.
NOTE) When you select MANU mode, GAIN and FTC will be switched to MANU mode, too.
(b) To switch from the MANUAL state
eq \x(AUTO) -----------------------------------
Set STC, GAIN and FTC at AUTO
5.3.8 Removing rain and snow clutter (FTC)
(1) When the "FTC" key is pressed, the FTC display on the
left side of the screen will be reversed as F 500 and the
adjustable state will be entered.
(2) When the control knob is turned, the figure will be shifted
within a range of 0 and 99, and the sensitivity can be
manually adjusted. When the "AUTO" key is pressed, all
(GAIN, STC and FTC) will enter an AUTO state.
(3) After the adjustment is finished, press the "FTC" key to
exit from the adjustment state. If some other function key
is pressed, shift to that function will take place.
(a) To make adjustments by MANUAL (When the FTC key is pressed under AUTO operation, shift to a manual
operation will take place.)
eq \x(FTC)
eq \x(Control knob)-----
eq \x(FTC)
The
adjustment
state is ended.
eq \x(Other function key)
Shift to other functions
eq \x(AUTO)
eq \x(AUTO) ------- GAIN, STC, and FTC are set at AUTO
and the adjustment state is ended.
(b) To switch from the MANUAL state
eq \x(AUTO) -----------------------------------
Set GAIN, STC and FTC at AUTO
5.3.9 Man Over Board (MOB)
Pressing the MOB key will send the own ship's position data to the external equipment through NMEA port.
There is no change on the screen.
To check the MOB position data, select "MOB" from the "WINDOW" menu in the "SETUP". The position
of MOB and current position will be displayed on the screen. If press the "MOB" key while watching the MOB
screen, MOB data will be cleared and return to previous screen. If press other keys, MOB data will be remained
and return to previous screen.
