33
eq \x(FL VRM2) FL VRM2 is turned ON and
(Select FL VRM2) the small cross mark appears.
(2) Use the left-right and up-down cursor keys to place the small cross mark on one of the two echoes whose
angle will be measured, and press the "ENT" key.
eq \x(Up/Down)&eq \x(Left/Right)
eq \x(ENT) Criterion
of
the
reference point is set.
(Place the cross cursor on an echo)
(b) Measuring
Perform the operations in the above mentioned and "measuring the distance(VRM2)", and place the VRM2
on another echo.
VRM2 is displayed on the screen based on the placed fixed cross cursor.
"eq \x( 2 ) xx. xNM" which is displayed at the lower right will be the distance between the two points.
5.4.7 Changing the group of Soft Keys (NEXT)
Any function can be optionally allocated to the key upon which numbers 1-7 are indicated. A maximum of 4
groups of functions can be allocated to each soft key, and switching between those functions is conducted by the
"NEXT" key.
The "NEXT" key switches between allocated function groups on the soft key which numbers 1-7 are indicated.
Every time pressing the "NEXT" key, function groups changes to another groups included pressing "NEXT"
key. The function groups can also be changed at the "KEY ASSIGNMENT" function in the "CUSTOM" menu of the
"SETUP" with left-right cursor key.
Operation
Soft Key Setting Example
SET1
SET2
SET3
SET4
The function can be changed at the "KEY ASSIGNMENT" function in the "CUSTOM"
menu of the "SETUP".
