Anritsu Network Master Pro MT1040A, Manual, Page: 9 / 36

9
1-4 10G Multirate Module MU100010A
The 10G Multirate Module MU100010A supports communications
network technologies with speeds ranging from 1.5 Mbps to 10 Gbps.
It has the functions and performance required for network I&M tests.
In addition, optional test protocols can be selected and added.
This excellent expandability helps cut initial capital costs and supports
introduction of new functions matching the work schedule.
New Purchase
Transport Module
Model Name
MU100010A 10G Multirate Module
Standard Accessories
W3935AE MT1000A Transport Quick Reference Guide: 1 pc
B0692A* ESD Box (for optical modules): 1 pc
*
: Up to four SFP+/SFPs can be stored.
1-4-1 Selecting Protocol Options
The protocol options are software options for transport technologies supporting each bit rate.
At least one Channel option must be selected from the following list.
MU100010A Bit Rate Less than 5G From 6G to 10G
Transport Technology
No. of Measurement
Ports*
1
2 (Dual Channel) 1 (Single Channel) 2 (Dual Channel)
Ethernet
IPv4/IPv6, Y.1564, IEEE 1588 v2, RFC 2544, BER, Multistream, OAM, SyncE, MPLS,
MPLS-TP, Multistage VLAN, PBB, Ping/Traceroute, Cable Tests, In-band Control,
Auto discovery, Path-through
MU100010A-001
Up to 2.7G Dual Channel
MU100010A-011
Ethernet 10G Single Channel
MU100010A-012
Ethernet 10G Dual Channel
TCP Throughput Test (RFC 6349, iPerf) MU100010A-020
TCP Throughput
eCPRI/RoE (IEEE1914.3)
IPv4/IPv6, BER, VLAN, SyncE, IEEE 1588 v2, E-OAM
MU100010A-001
Up to 2.7G Dual Channel
MU100010A-011
Ethernet 10G Single Channel
MU100010A-012
Ethernet 10G Dual Channel
OTN*
2,
*
3
Errors/Alarms, Error Performance/Delay/APS Test, FEC Test, O.182 Test,
Overhead Editing/Capture, TCM Monitoring/Generation, Tributary Scan
MU100010A-001
Up to 2.7G Dual Channel
MU100010A-051
OTN 10G Single Channel
MU100010A-052
OTN 10G Dual Channel
ODU Multiplexing Addition*
4
MU100010A-061
ODU Multiplexing
ODU Flex Addition*
5
— MU100010A-062
ODU Flex
CPRI/OBSAI
CPRI/OBSAI L1: Level/Bit Rate/Frequency deviation Measurement,
Alarms/Errors Detection, Unframed BER
CPRI/OBSAI L2: Link Status Monitoring, Alarms/Errors Detection,
Framed BER Measurement, RTD Measurement,
Monitoring using Passthrough
MU100010A-071
CPRI/OBSAI Up to 5G
Dual Channel
MU100010A-072
CPRI/OBSAI 6G to 10G
Single Channel
MU100010A-073
CPRI/OBSAI 6G to 10G
Dual Channel
Fibre Channel
Performance Test, Signal Generation/Monitoring, Latency, BER,
Line Alarm/Error Monitoring
MU100010A-002
FC 1G 2G 4G Dual Channel
MU100010A-091
FC 8G 10G Single Channel
MU100010A-092
FC 8G 10G Dual Channel
SDH/SONET, PDH/DSn
PDH/DSn Test, Tw-Way Monitoring/Mapping, Errors/Alarms,
Error Performance/Delay/APS Test, Header Monitoring/Generation,
Pointer Event Generation, Tributary Scan
MU100010A-001
Up to 2.7G Dual Channel
MU100010A-081
STM-64 OC-192
Single Channel
MU100010A-082
STM-64 OC-192
Dual Channel
*
1: The channel is not related to the physical port position. The user can freely choose either of the two physical ports assigned to the option via software.
For a dual channel setup, the two different ports of one protocol can operate simultaneously, or two different single channel options can operate simultaneously.
*
2: Please see the datasheet for supported OTN mapping.
*
3: When using the OTN function, the channel can be used as client signal mapped to OTN. For example, when mapping STM-64/OC-192 to OTU2, both the
MU100010A-051/052 (for physical port) and the MU100010A-081/082 (for client signal) are required.
*
4: When the ODU Multimapping option is installed, OTN multistage mapping measurements are supported.
This one option supports both single channel and dual channel.
*
5: When the ODU Flex option is installed, since transport is over OTN networks, mappings based on used ODU Flex standard can be measured.
This one option supports both single channel and dual channel.