Anritsu Network Master Pro MT1040A, Manual, Page: 25 / 36

25
Additional Purchases
Adding New Options to Previously Purchased MT1040A
<MU104015A>
To add a new protocol option to a previously purchased MU104015A, choose the required option from the following list.
The MU104015A serial number is required to make the purchase.
MU104015A Bit Rate 10G or less 16G or 25G 40G or 100G 400G
Transport Technology
No. of Measurement
Ports*
1
2 (Dual Channel) 2 (Dual Channel) 1 (Single Channel) 2 (Dual Channel) 1 (Single Channel)
Ethernet
IPv4/IPv6, Y.1564, IEEE 1588 v2, RFC 2544, BER, Multistream,
OAM, SyncE, MPLS, MPLS-TP, Multistage VLAN, PBB,
Ping/Traceroute, In-band Control, Auto discovery,
Y.1564 (100G), Reflector
MU104015A-312
Ethernet up to 25G Dual Channel Retrofit
MU104015A-313
Ethernet 40G
Single Channel Retrofit
— —
MU104015A-315
Ethernet 100G
Single Channel Retrofit
—
MU104015A-333
Ethernet 400G
Single Channel Retrofit
Pass-through (10G), Channel Stat (10G)
MU104015A-312
Ethernet up to 25G
Dual Channel Retrofit
— — — —
TCP Throughput Test (RFC 6349, iPerf,10G)
MU104015A-320
TCP Throughput
Retrofit*
2
— — — —
eCPRI/RoE (IEEE1914.3)
IPv4/IPv6, BER, VLAN, SyncE, IEEE 1588 v2, E-OAM
MU104015A-312
Ethernet up to 25G Dual Channel Retrofit
MU104015A-313
Ethernet 40G
Single Channel Retrofit
— —
MU104015A-315
Ethernet 100G
Single Channel Retrofit
— —
OTN
Errors/Alarms, Error Performance/Delay/APS Test, FEC Test,
O.182 Test, Overhead Editing/Capture, TCM Monitoring/
Generation, Tributary Scan
MU104015A-352
OTN up to 10G
Dual Channel Retrofit
—
MU104015A-353
OTN 40G
Single Channel Retrofit
— —
—
MU104015A-355
OTN 100G
Single Channel Retrofit
— —
ODU Multiplexing Addition
MU104015A-363
ODU Multiplexing/
Multi Stage Retrofit*
3
—
MU104015A-363
ODU Multiplexing/
Multi Stage Retrofit*
3
— —
CPRI/OBSAI
CPRI/OBSAI L1: Level/Bit Rate/Frequency deviation Measurement,
Alarms/Errors Detection, Unframed BER
CPRI/OBSAI L2: Link Status Monitoring, Alarms/Errors Detection,
Framed BER Measurement, RTD Measurement,
Monitoring using Passthrough
MU104015A-374
CPRI/OBSAI up to 25G Dual Channel Retrofit
— — —
Fibre Channel
Performance Test, Signal Generation/Monitoring, Latency, BER,
Line Alarm/Error Monitoring
MU104015A-392
FC up to 16G Dual Channel Retrofit
— — —
SDH/SONET
Two-Way Monitoring/Mapping, Errors/Alarms,
Error Performance/Delay/APS Test, Header Monitoring/
Generation, Pointer Event Generation, Tributary Scan
MU104015A-382
SDH/SONET up to
10G Dual Channel
Retrofit
—
MU104015A-384*
4
STM-256/OC-768 Client Signal Retrofit
—
*
1: The channel is not related to the physical port position. The user can freely choose either of the two physical ports assigned to the option via software.
For a dual channel setup, the two different ports of one protocol can operate simultaneously, or two different single channel options can operate simultaneously.
*
2: Requires to MU104015A-012.
*
3: Requires that at least one of the following option is installed: MU104015A-052, MU104015A-053, MU104015A-055.
*
4: MU104015A does not have a physical interface of the option. The option is required for client signal mapped in the OTN.