Anritsu Network Master Pro MT1040A, Manual, Page: 22 / 36

22
Use this flowchart when adding modules and options to a previously purchased MT1040A.
Additional Purchases Flowchart
Adding Functions
Confirm the serial numbers of the
MU100010A/MU100011A/
MU104011A/MU104014A/
MU104015A.
Select Protocol
Select the model for choosing the
measurement protocol port
number, options, etc., from 4-1
Adding Test Protocols for
Transport Module.
Page 24 to 28
Select Protocol
Select the model for
choosing the measurement
protocol port number,
options, etc., from 1-4-1
Selecting Protocol Options.
Page 9
Select Protocol
Select the model for
choosing the measurement
protocol port number,
options, etc., from 1-3-1
Selecting Protocol Options.
Page 8
Select Protocol
Select the model for
choosing the measurement
protocol port number,
options, etc., from 1-5-1
Selecting Protocol Options.
Page 10
Select Optical I/F
Select the model for choosing the
optical module frequency and bit
rate from 1-6 Selecting Optical
Transceiver for Transport Module.
Page 11
Select Optical I/F
Select the model for choosing the optical module frequency and bit rate from 1-6 Selecting Optical Transceiver for Transport Module.
Page 11
Refer to 3-1 MT1040A Power Supply Option to see your new configuration requires MTT1040A-020 or not.
Check your MT1040A has MT1040A-006 or not
Please contact sales representative
Select Transport Test Options
Select the model for choosing the required options from 1-7 Selecting Transport Test Option.
Page 12
Selecting Main Frame Accessories. Select the main frame optional accessories from 3-1 MT1040A
Selecting Common Application Parts.
Select the model for the extended hardware warranty from 3-3 MT1040A Selecting Extended Warranty
Services.
Page 18
Record the purchased model and name in the configuration confirmation order sheet.
Page 30
Adding Protocol Options Adding Transport Module
Choose MU100010A
Page 9
Choose MU104011A
Page 8
Choose MU100011A
Page 10
Select the type of interface to measure
(10G) Up to 10G including PDH with independent dual port.
(100G Single) 100G, 40G and 25G with single port. Up to 10G are with two ports which are restricted to be same protocol (Ethernet, OTN, FC,
SDH/SONET)
(100G Dual) Up to 100G with independent dual port.
(200G/400G) 200G/400G single port.
10G 100G Dual
Yes
MT1040A-020 is necessary
100G Single
MT1040A-020 is not necessary
200G/400G
No
Choose MU104014A for QSFP-DD,
400G/200G, 100G dual
Page 6
Choose MU104015A for OSFP,
400G, 100G single
Page 7
Select Protocol
Select the model for choosing the
measurement protocol port
number, options, etc., from 1-1-1
(QSFP-DD) or 1-2-1 (OSFP)
Selecting Protocol Options.
Page 6, 7