Anritsu Network Master Pro MT1040A, Manual, Page: 16 / 36

16
2-4-1 Selecting Dynamic Range
The MU100023A has a fixed dynamic range; select the following model.
Wavelength: Dynamic Range Model Name
1310/1550 nm: 42/41 dB, 1650 nm: 35 dB MU100023A-021 Enhanced Dynamic Range
2-4-2 Selecting Polish Type/Connector Adapter
The MU100023A is available in a total of five models (3 UPC and 2 APC) as listed below. Specify the required connector type at ordering.
The specified connector is provided as a standard accessory. The polish type cannot be changed after purchase.
Polish Type
Connector Adapter
UPC*
UPC Ultra Physical Contact
APC*
APC Angled Physical
Contact
Model Model
FC Connector
MU100023A-010
MU100023A-037
MU100023A-011
MU100023A-025
DIN 47256 Connector
MU100023A-010
MU100023A-039
SC Connector
MU100023A-010
MU100023A-040
MU100023A-011
MU100023A-026
*
: Different types of connector adapters cannot be selected for the SM port (1310/1550 nm) and the SM port (1650 nm).
2-4-3 Selecting Visible Light Source Option
Breaks in the optical fiber can be detected visually using this light source. This option cannot be added after purchase.
Model Name Notes
MU100023A-002 Visual Fault Locator For direct insertion of 2.5 mm (FC, SC, DIN) optical fiber with fixed diameter of 2.5 mm.
J1335A MU/LC Connector Adapter Required conversion adapter for inserting LC (1.25 mm) optical fiber
New Purchase
OTDR Module
2-4 OTDR Module 1310/1550 nm, 1650 nm SMF MU100023A
Model Name
MU100023A OTDR Module 1310/1550/1650 nm SMF
Standard Accessories
J1693A Universal Connector 2.5 mm for OPM: 1 pc
J1694A Universal Connector 1.25 mm for OPM: 1 pc
W3811AE Quick Reference Guide: 1 pc
The OTDR Module 1310/1550 nm, 1650 nm SMF MU100023A is an
OTDR module for single mode fiber use only. It supports all-in-one
OTDR, FTTA, and OLTS measurements required for checking optical
fiber. Additionally, combined used with the visible light source options
support visual confirmation of fiber breaks, etc.
SM Port
(1650 nm) OPM Port
SM Port
(1310/1550 nm)