Anritsu Network Master Pro MT1040A, Manual, Page: 15 / 36

15
2-3-1 Selecting Dynamic Range
The MU100022A has a fixed dynamic range; select the following model.
Wavelength: Dynamic Range Model Name
1310/1550/1625 nm: 46/46/44 dB MU100022A-022 High-Performance Dynamic Range
2-3-2 Selecting Polish Type/Connector Adapter
The MU100022A is available in a total of five models (3 UPC and 2 APC) as listed below. Specify the required connector type at ordering.
The specified connector is provided as a standard accessory. The polish type cannot be changed after purchase.
Polish Type
Connector Adapter
UPC
UPC Ultra Physical Contact
APC
APC Angled Physical
Contact
Model Model
FC Connector
MU100022A-010
MU100022A-037
MU100022A-011
MU100022A-025
DIN 47256 Connector
MU100022A-010
MU100022A-039
SC Connector
MU100022A-010
MU100022A-040
MU100022A-011
MU100022A-026
2-3-3 Selecting Visible Light Source Option
Breaks in the optical fiber can be detected visually using this light source. This option cannot be added after purchase.
Model Name Notes
MU100022A-002 Visual Fault Locator For direct insertion of 2.5 mm (FC, SC, DIN) optical fiber with fixed diameter of 2.5 mm
J1335A MU/LC Connector Adapter Required conversion adapter for inserting LC (1.25 mm) optical fiber
New Purchase
OTDR Module
2-3 OTDR Module 1310/1550/1625 nm SMF MU100022A
Model Name
MU100022A OTDR Module 1310/1550/1625 nm SMF
Standard Accessories
J1693A Universal Connector 2.5 mm for OPM: 1 pc
J1694A Universal Connector 1.25 mm for OPM: 1 pc
W3811AE Quick Reference Guide: 1 pc
OPM Port SM Port
The OTDR Module 1310/1550/1625 nm SMF MU100022A is an OTDR
module for single mode fiber use only. It supports all-in-one OTDR,
FTTA, and OLTS measurements required for checking optical fiber.
Additionally, combined used with the visible light source options
support visual confirmation of fiber breaks, etc.