Anritsu 3656C W1, User Manual, Page: 122 / 164

4-5 Running the Verification Software Using the PVS Software with the ME7828A
4-8 PN: 10410-00784 Rev. A 3656C W1 Cal/Ver Kit & 2300-616-R PVS UG
10. Enter the Source 1 LO serial number (found on the rear panel of the upper Signal Generator) and click
OK
.
11. Enter the Source 2 RF model number (lower Signal Generator, usually an MG37022A) and click
OK
.
12. Enter the Source 2 RF serial number (found on the rear panel of the lower Signal Generator) and click
OK
.
Figure 4-10. Source 1 LO Serial Number Dialog
Figure 4-11. Source 2 RF Model Number Dialog
Figure 4-12. Source 2 RF Serial Number Dialog