000-015-480 Issue 5
22
nd
May 2017
Anite S-CORE Getting Started Guide
Page 38 of 47
Commercial In Confidence
6.3
Configuring S-Core GUI for multicell
After installing RF package, log in to S-CORE GUI. Now two cell options (Cell1 and Cell 2) can be
seen in S-Core GUI
To configure and enable the LTE cells:
1.
Right click on the first cell and select Technology > LTE-FDD LTE-FDD (as shown below).
2.
Right click on the second cell and select Technology > LTE-FDD LTE-FDD.
Both cells are now configured for LTE
3.
Right click on the first cell and select
Settings of 1
.
