000-015-480 Issue 5
22
nd
May 2017
Anite S-CORE Getting Started Guide
Page 35 of 47
Commercial In Confidence
Important settings needed for testing:
Table 12 WCDMA settings
Setting
Description
Band
Band under test.
Path Loss
Default values for 3G; 15dBm if Antenna Coupler is used, 7dBm if DUT
if directly connected with S-CORE.
DL, UL ARFCN
Downlink / Uplink Absolute Radio Frequency Channel Number
DL Reference Power
Downlink reference power. Lower default values when connecting
directly to Device Under Test.
UL Reference Power
Uplink reference power.
MS IP address
IP for mobile, it should be configured in the same subnet as the S-
CORE.
DNS IP address
User can configure the S-CORE IP as DNS IP if the system operates in
local standalone test environment.
K value, IMSI
Information of test SIM card. Refer to the System Configuration
Document.
For detailed information about the settings, please refer to the
Anite S-CORE Application Testing:
Operating Guide
. After changing the settings or starting test cases for the first time after logging in
to the S-CORE GUI, first click on
Apply
and then
Switch on
the cell.