000-015-480 Issue 5
22
nd
May 2017
Anite S-CORE Getting Started Guide
Page 10 of 47
Commercial In Confidence
2.2
TP-Link Router
The delivery of the S-CORE test system may contain a TP-Link router, which is pre-configured with
the correct settings and is ready to use.
Front View
Rear View
Table 3
TP-Link Router panel
Button/Port
Description
1.
Power
Used for connecting to the AC main power adapter.
2.
Reset Button
Holding down this button for 5 to 10 seconds will reset the wireless
router back to the default TP-Link factory settings.
It is recommended to contact support team before resetting router.
3.
LAN
RJ-45 connection type for connecting TP-Link router with LAN.
4.
Ethernet 1 …. 4
RJ-45 connection type for connecting TP-Link router with the S-CORE
and the user’s PC.
The TP-Link router is delivered pre-configured (DHCP server enabled) to be used with the S-CORE.
In most cases, it is unnecessary for the user to change the router configurations. You can change
the IP Address of the TP-Link Router, as described in section A2.
