000-015-480 Issue 5
22
nd
May 2017
Anite S-CORE Getting Started Guide
Page 27 of 47
Commercial In Confidence
For future reference, the RF settings for each RAT (GERAN-RAT, LTE-FDD, WCDMA-RAT) can be
exported to a file using the
Export
button, and these exported files can be imported using the
Import
button.
Note:
After importing or changing the RF settings, always click
Apply
before switching on the RF
cell.
The following sections display the Settings Options Windows for the three available RATs (GERAN,
WCDMA and LTE).
Note:
Specifying an RF value that is too low can lead to a Layer 1 system error (shown below),
which requires the S-CORE unit to be re-booted. In this case, increase the Rx Power or decrease
the external attenuation in steps of 1dBm until the S-CORE unit does not generate any Layer 1
system errors.
5.2.1
GERAN-RAT
To change the cell settings for GERAN-RAT, right click on the cell and then select Settings of
GERAN-RAT.
Main tab
