Angioscan Electronics AngioScan-01, User Manual, Page: 84 / 119

80
© 2014 AngioScan-Electronics LLC
Graphic Interface
To escape from time interval measure mode left click the mouse.
To measure the blood pressure interval, perform the same actions holding Ctrl key.
There are elements controlling graphs view and lists of measured parameters of contour analysis to the
right of the graphs. On the right side there is a list of average measured parameters, on the left side
there is a list of selected pulse wave values which graph is indicated by yellow. All parameters are
displayed in
Extert Mode and the most important ones are shown in user mode. If you move the cursor
to a parameter, the tooltip with its full name will appear.
By clicking the arrows near the "# beats" field one can change the number of selected pulse wave.
By clicking the arrows near the "Show the number of beats" one can change the number of pulse
waves displayed on graphs.
If you remove the check mark from the "Show the number of beats" field, the graphs will show only
one pulse wave.
The "Table" toolbar button displays the list of meanings of parameters in table format:
The "Recalculate" toolbar button allows to recalculate values of parameters with due account taken of
new values of blood pressure, that one can enter in the appropriate fields (see above).
The toolbar arrows allow to sequentially download the patient's results of Contour Analysis test from