Angioscan Electronics AngioScan-01, User Manual, Page: 6 / 119

2
© 2014 AngioScan-Electronics LLC
Introduction
1 Introduction
1. The User Guide (UG) is designed for customers and engineers working with AngioScan-01
Diagnostic Complex of Cardio-Vascular System State (further "AngioScan device" or
"AngioScan").
2. The User Guide contains all necessary information about operation and technical characteristics of
the device, about its preparation for work and exploitation rules. The information is important for use of
all technical options of the device and its right exploitation.
3. The device is designed for use by specialists after they study the User Guide.
4. As the device is being updated all the time, there might be some slight changes not reflected in the
present User Guide.
1.1 Technical Specifications
General Technical Specifications
The complex corresponds to technical requirements TU 9442-001-30577-000009020-2008, GOST Р
50444 and to design documentation's set.
The complex runs under IBM PC with minimum system requirements:
- Operating System - Windows 98/NT/2000/XP;
- Processor - Pentium III 500 MHz and over;
- Random Access Memory (RAM) 128 MB;
- Video Card SVGA Hi-Color 1024ґ768 8 MB or more;
- Color printer;
- Not less than 800 MB of free hard disk space;
- One free serial port and two USB ports;
- CD-ROM.
Basic parameters and dimensions
Number of channels for receiving and registering of two input signals - 2;
Primary transmitter is based on optoelectronic pair;
Range of input voltages, LEV, 5 - 100;
Channel noise level must not exceed mV, 100;
Frequency range of input signals, Hz, 0.5-130;
Unevenness of amplitude-frequency characteristics should be %, -30 to +5;
Supply voltage, V, 220.
Power supply of primary conversion is to be done via personal computer;
The power consumed by the complex must not exceed VA 1.5;
Overall dimensions of the converter unit are, mm:
- Width - 60;
- Length - 75;
- Height - 15.
Weight of the unit converter is, kg, 0.5.
1.2 Package list
AngioScan-01
device 1
Photoplethysmograp
hy sensor 2
Interconnecting
cable (mini USB) 1
Basic Software (CD-
ROM) 1