
WARNING:
- CHECK THE PROPER TIGHTENING OF ALL FITTINGS, SINCE THEIR SUDDEN OPENING CAN
SERIOUSLY INJURE PEOPLE.
WARNING:
- CONSULT THE LOCAL CODE FOR DETAILED INSTRUCTIONS REGARDING GROUND CONNEC-
TIONS IN THE WORK AREA AND THE TYPE OF SYSTEM USED.
- THE GROUND CABLE (INCLUDED IN THE SUPPLY) MUST HAVE A MINIMUM SECTION OF 1.5
mm2.
- ONE END OF THE CABLE MUST BE EARTHED WHEREAS THE OTHER MUST BE CONNECTED
TO THE REAR PANEL OF THE PRESSURE REGULATOR (G); See figure 2 and 3 page 18]
4.4
Precautions
1.
Operate the pump with air filtered by means of an air filter with a filtering section under 50 µm;
it is recommended to use a filter with automatic condensate discharge.
2.
The pump must not run idle.
3.
Do not spray paint or solvents towards the pump.
4.
Do not install the pump near heat sources or exposed to the sun. Install it in a place sheltered
from water sprinkles.
17
Summary of Contents for MSU B193
Page 35: ...35 FIGURE 1...
Page 37: ...37 EXPLODED VIEW MOTOR BM25046...
Page 39: ...39 EXPLODED VIEW MOTOR BM20046...
Page 47: ...47 NOTE...