- 2 -
Ű
1. Safety Warnings
WARNING
FIRE OR EXPLOSION HAZARD
1. Fluid and/or solvent can be highly flammable or combustible.
-
Use in well-ventilated spray booth.
-
Avoid any ignition sources such as smoking, open flames or electrical hazard.
2. To reduce the risk of static sparking, grounding continuity to the spray equipment, fluid
container and object being sprayed must be maintained.
HAZARD CREATED WHILE COATING MATERIALS ARE ATOMIZED AND SPRAYED
1. Toxic vapors produced by spraying certain materials can cause intoxication and
serious damage to health.
-
Use in well-ventilated areas.
-
Always wear protective clothing, eyewear, gloves and respirator to prevent toxic
vapor, solvent and paint from coming into contact with your eyes and skin.
PRESSURIZED FLUID HAZARD - INJECTION HAZARD
1. Pressurized hazardous fluid can cause serious injury or death.
-
Always wear protective clothing, eyewear, gloves and respirator.
-
Never spray toward a person or animals and never pull the trigger of the spray
gun near the body.
-
Never stop or deflect a fluid leak from the spray equipment or fluid hose with your
hand. Be sure to stop the spray equipment according to the correct procedures.
2. Replace hoses immediately, if cracked, damaged, bent, crushed, distorted or worn.
Use of such hoses can cause damage.
3. Never bend hoses with a radius of less than 2in. (50mm) or put heavy items on top of
hoses.
4. Keep hoses away from sharp edge and moving parts.
5. Be sure to tighten all connections.
MISUSE HAZARD
1. Never touch moving parts.
2. Always release air and fluid pressure when not in use.
3. Always release air and fluid pressure before cleaning, disassembly or service. For
emergency stop and to prevent unintended operation, a shut off valve is installed on
this unit to stop the air supply.
4. Be sure to use the spray equipment at less than the maximum working pressure. If not,
it can cause spray equipment failure, malfunction, serious injury or death.
5. Never modify this unit for any other applications.
6. Never use this unit to spray or supply food products.
7. If operation appears incorrect, immediately stop operation and find the cause.
8. Never use until the problem has been solved.
9. Pay attention to avoid hitting or dropping this unit, especially threaded and seated
parts.
10. Never use damaged parts.
11. Repair or replace worn or damaged parts immediately. Always use ANEST IWATA
replacement parts.
12. Never operate this unit or disassemble without receiving proper education and training.
13. Wear hearing protection.
OTHER HAZARD
1. Be sure to follow fire prevention, electrical and other local regulations.
Summary of Contents for MSU-111N
