ANEP S-BOX
Version N° 3
11/06/2014
50
7 - KeYPAD ProgrAMMing
7.1 - recap of programming sequences
Enter & exit programming mode
*
+ <Access code > Enter programming mode
*
Exit programming mode
#0... Programming of parameters
#001# Erasing parameters and phone numbers
#002...#
New acces code
#1... Telephone numbers.
#101...#
Main telephone number for Emergency elevator telephone calls
#102...#
Secondary telephone number for Emergency elevator telephone calls
#103...# Third telephone number for Emergency elevator telephone calls
#104...#
Call center telephone number to transfer data after voice
#105...#
Telephone number for periodic calls
#106...#
Telephone number for internet server
#2... Communication
#200...#
Selection of communication protocol
#201...#
Voice call timeout (1 to 99 minutes)
#202# Call acknowledge by operator function enabled
#203# Call acknowledge by operator function disabled
#204# Enabling full duplex mode in car
#205# Enabling full duplex with voice control
#206# Dual calling mode (call to a caretaker) enabled
#207# Dual calling mode (call to a caretaker) disabled
#3... Configuration
#301...#
Test call period (1,2 or 3 days)
#302...#
Alarm button recognition time (10 to 64 in 1/10 s)
#303...#
Module address (1 to 8)
#4... Configuration
#403...#
Line voltage low ( > = 20V)
#404...# Line voltage normal ( > = 28V)
#405...# GSM enabled
#405...# GSM disabled
#409...# Adjusting the level of emissions of DTMF codes
#410...# Loudspeaker volume adjustement
#411...# Microphone volume adjustment
