ANEP S-BOX
Version N° 3
11/06/2014
44
5.5.6 - test call period
In programming mode:
Enter the sequence
#
301
Enter the number of days corresponding to the test call period
1, 2 or 3
.
default value : 3 days example : 2 days =
#
301 2
#
note
: A periodic call will be made immediately upon exiting programming mode, once the
periodic call number has been programmed.
The speaker is activated during the call, so the technician is aware of the communication.
5.5.7 - transmission of call identification code during a call
During dialing and call identification, it is possible to listen to the tone sequences sent by
S-BoX
in order to inform the technician present that
S-BoX
is transmitting information.
note
: Programming is disabled during a call.
5.5.8 - Modification of access code
In programming mode :
Enter the sequence
#
0
0
2
Enter the new access code (from 1 to 7 digits) then «
#
»
Confirm the new access code (from 1 to 7 digits) then «
#
»
It is very important to remember the new code.
If lost, the unit
must be returned to the manufacturer
.
