Anderson SMARTMIX A1230FD, Operator'S Manual

Page: 69 / 129

Anderson Group Mixer – Operator's Manual 67
4.4.1 Adjusting the hatches by direct drive
If your SMARTMIX is equipped with a front hatch only, the hatch is adjusted using the tractor's
hydraulic controls.
If your SMARTMIX is equipped with both front and rear hatches, the hatches are adjusted using the
same tractor hydraulic controls via a two-position selector switch (see "Controls" on page 75).
4.4.2 Adjusting the hatches by SMART Control
If your SMARTMIX is equipped with a front hatch only, the hatch is adjusted using the tractor's
hydraulic controls.
If your SMARTMIX is equipped with both front and rear hatches, the hatches are adjusted using the
same tractor hydraulic controls via the SMART Control remote (see "Controls" on page 75).
4.5 Adjusting the horizontal conveyor offset
When driving on public roads, ensure that the
conveyor is centred.
4.5.1 Fixed horizontal conveyor (standard for FD models)
The fixed horizontal conveyor can be in any of the following five positions:
l
Centre position;
l
Offset by 150 mm (5.9 in.) on the right;
l
Offset by 375 mm (14.75 in.) on the right;
l
Offset by 150 mm (5.9 in.) on the left;
l
Offset by 375 mm (14.75 in.) on the left.
Select the position that best suits your distribution.