Anderson Group
Round Bale Wrapper IFX720 – Operator's Guide
40
Table 12 — Miscellaneous Troubleshooting
Problem
Possible cause
Solution
The hydraulic stop activates by
itself.
The levers that connect the plastic watch to
the hydraulic stop are loose.
Tighten the bolts on the
plastic watch lever.
The front tailgate cylinder does not
work when it is activated.
The tailgate ball valve is closed.
Open the ball valve to allow
the tailgate to start.
Table 13 — Troubleshooting the Wrapping (Plastic Film)
Problem
Possible cause
Solution
The plastic film breaks at
normal temperatures.
The film is not tight enough.
1. Ensure that the plastic film roll is installed
as indicated in the diagram (Figure 15).
2. Check that the stretcher and spring
components are in good condition.
Debris is wrapped around the
rolls or in the stretchers.
Remove the debris and check the general
condition of the stretchers.
The aluminum rollers are dirty.
Clean the aluminum rollers with penetrating oil.
The rubber roller is damaged.
Replace the rubber roller.
The spears have become rough.
Gently sand the lower part of the spears.
Summary of Contents for IFX720
