Anderson IFX720, Operator'S Manual

Page: 18 / 133

Anderson Group Round Bale Wrapper IFX720 – Operator's Guide 18
Figure 13 — Brake Pedal
2. Pull on the roll lock (knob) to disengage the front
plastic film support ( Figure 14 ). Then slide the
support forward and, if applicable, remove the
empty roll.
Figure 14 — Plastic Film Roll Supports
NOTE: The rollers of the stretcher should always
be clean and should turn freely to keep
the plastic film from jamming or tearing.
If needed, see section 6.4 to learn how to
clean and maintain the stretcher rolls.
3. Install the new roll of plastic film so that it unrolls
as shown in the diagram below.
Figure 15 — Installing the Plastic Film
4. Repositioning the film roll supports
5. Insert the film between the rollers of the stretcher
(see Figure 15 ). Roll it first around the movable
black rubber roller and then between the two
aluminum rollers.
6. If your wrapper has with a plastic watch (see
section 9.2 for more information about this
option), the film should be rolled around the
plastic watch as well (Figure 15).
7. Pull on the plastic film until you have enough to tie
a knot at the end. Attach the film to the hook on
the bale guide as shown in the image below. For
this step, you need to have placed a bale that is
ready to be wrapped on the machine (see section
4.4).