AMD5x Passive Infeed Unit and AMD5x Servo Drive - User Guide
ANCA MOTION
D-000129 Rev 09
116
10.5
Environmental Specifications
Table 41: Environmental Specifications
Attribute
Qualification
Storage
10.5.1
Ambient Temperature
-20 to +65° C
Relative Humidity
5 to 90%
Storage dust and solid particles exposure limit
IEC 60664-1 Clean air pollution degree 2
Within the specifications given above, also do NOT allow the packaged PIU or Drive (in box) to exceed the
following conditions as per IEC 60721-3-1: climatic conditions 1K5, mechanical stress class 1M3, chemical
influences class 1C2 and sand and dust class 1S2.
Transport
10.5.2
Ambient Temperature
-20 to +65° C
Relative Humidity
90% at 40° C
Mechanical Vibration
10 to 57 Hz at 0.075 mm displacement amplitude
sinusoid, and 9.8m/s
2
from 57 to 150 Hz.
IEC 61800-5-1
Within the specifications given above, also do NOT allow the packaged drive (in box) to exceed the
following conditions as per IEC 60721-3-2: climatic conditions 2K4, mechanical stress class 2M2, chemical
influences class 2C2 and sand and dust class 2S2.
Installation and Operation
10.5.3
Permissible cabinet ambient temperature of Duct
Mounted Drives
0 to +55 °C
Permissible temperature of air entry to heatsinks of
Duct Mounted Drives
0 to +45 °C
Permissible cabinet ambient temperature of Wall and
Recessed Mounted Drives. See
for current derating above 40
⁰C
0 to +50 °C
Relative Humidity
5 to 85% non-condensing
Mechanical Vibration
10 to 57 Hz at 0.075 mm displacement amplitude
sinusoid, and 9.8m/s
2
from 57 to 150 Hz.
IEC 61800-5-1
Unusual environmental conditions
Not provided beyond IEC 60146-1-1
Maximum installation altitude
1000 m above mean sea level
Operating dust and solid particles exposure limit
IEC 60664-1 Clean Air Pollution Degree 2
M6 mounting screw torque
(use M6 SEMS screw assembly with captive washer)
3.0 Nm
DC Bus & PE M4 nyloc nut torque
1.5 Nm
Within the specifications given above, do NOT allow the PIU or drive to exceed the following conditions as
per IEC 60721-3-3: climatic conditions 3K3, mechanical stress class 3M3, chemical influences class 3C2
and sand and dust class 3S2.
Summary of Contents for AMD5x Series
Page 12: ......
