Analog Devices Lite ADSP-BF527 EZ-KIT, Manual

Page: 85 / 117

ADSP-BF527 EZ-KIT Lite Evaluation System Manual 2-33
ADSP-BF527 EZ-KIT Lite Hardware Reference
LCD Touchscreen Connector (P18)
There is no connector for the touchscreen; the flex cable is soldered
directly to the board.
LCD Backlight Connector (P19)
There is no connector for the backlight; the flex cable is soldered directly
to the board.
USB Debug Agent Connector (ZJ1)
The USB debug agent connector is the connecting point for the JTAG
USB debug agent interface. The JTAG header (
ZP4
) should not be used
whenever
ZJ1
and its mating cable are used to communicate to the proces-
sor via Vi+.
JTAG Connector (ZP4)
The JTAG header is the connecting point for a JTAG in-circuit emulator
pod. When an emulator connects to the JTAG header, the USB debug
interface is disabled.
Pin 3 is missing to provide keying. Pin 3 in the mating connector should
have a plug.
When using an emulator with the EZ-KIT Lite board, follow the connec-
tion instructions provided with the emulator.
www.BDTIC.com/ADI