Power Setup
1-34
ADSP-BF526 EZ-Board Evaluation System Manual
To set up the board for battery operation, the settings in
are a
good starting point.
Refer to the individual switch and jumper descriptions for alternate
settings.
Note that complying with USB current limitations requires limit-
ing the charging rate and implementation of power saving features.
P23
OFF
P25
OFF
SW22
OFF
Table 1-6. Battery Power Settings
Switch/Jumper
Battery Setting
JP8
(if 5V needed on the expansion interface II)
Positions 5 and 6, 7 and 8
JP9
(if 5V needed on expansion interface II)
Uninstalled
JP10
Positions 1 and 2
JP15
P17
P23
OFF
; see
P25
ON
SW22
ON
Table 1-5. 5V Power Settings (Cont’d)
Switch/Jumper
5V Setting